Plastic injection industry
Plastic injection industry
About the American plastics industry
When it comes to processing in the United States, the plastics industry has always been at the forefront of the most successful industries, which has had a significant impact on the country’s economic situation. Meanwhile, the plastic injection industry is one of the most important economic sectors in the United States and the source of thousands of jobs in this country.
The following are some thought-provoking points that show the foundation for the continued success of the plastic injection industry in this country. These points are collected on the basis of data from the Plastics Industry Association, the Chemical Council, and the US Job Statistics Office.
In the United States, the plastics industry is the third largest manufacturing industry, and with a high level of demand around the world, from injectable products to even 3D printers, it has tremendous prospects for the future.
By discussing the greatness of the plastics industry, we will see the subject of employment, with 800,000 workers in the industry in the United States alone, making the plastics industry a key structure in manufacturing and for the US workforce as a whole. has done. This is only part of the story, when it comes to plastic suppliers, the number goes even higher. Overall, the US plastics industry has nationalized approximately 1.5 million trades.
Plastic injection machines
Plastic injection machines and their related equipment are produced and supplied in 40 provinces across the United States, which means the presence of 17,000 unique processing of plastic injection machines and related accessories, which is a very significant number.
The plastics industry in the United States has revenues of several billion dollars. In 2011, for example, the value of plastic products exported worldwide reached nearly $ 385 billion.
One of the emerging signs of optimism and American artisans’ longing for the plastics industry is their $ 10 billion investment in 2012 in upgrading the machinery and equipment of the industry, which is an unprecedented figure.
With the dramatic increase in the consumption of plastic products in the United States, this industry has become a lucrative business, so that in the middle of 2014 and 2015, the amount of waste in this industry has increased by 5.8 percent.
It is no secret that the success of the plastics industry in the United States depends on the global interest and demand for these products. The world today has great confidence in the American plastics industry. Mexico, Canada and China are among the most important countries in the field of importing plastic products from the United States.
The decline in economic growth in the last decade – especially in the recession of recent years – is not hidden from anyone, and many industries in the United States have been hit in this regard, but the plastics industry is among the only industries that not only did not suffer from recession, but It has achieved good growth. In the last 25 years, the annual production of various industries in the United States has decreased by 1.4 percent, while the production of plastics has grown by an average of one tenth of one percent annually.
The surplus processing income of the plastics industry in the United States is about $ 24.1 billion a year, which is a very significant figure compared to production in general.
The final point is about the amount of plastics and resins produced in the United States, which reaches nearly 48 billion kilograms per year, and this amount grows to about one million tons annually. This figure is very prudent and impressive.
Based on many statistics, it is clear that the plastics industry is growing rapidly and strongly not only in the United States but all over the world, and the exciting thing is to observe how close this industry is to pulsation and control. It will take over the US economy.
FREE FORMER device
He boldly said that the German company Arburg, with nearly 2,500 employees in Germany and more than 500 in other parts of the world in the form of more than 50 active agencies, is one of the leaders in the plastics industry worldwide. This company has always been the leader of this huge industry with its initiatives and has always been outstanding in this regard. One of the company’s innovations is the prototype processing machine, ARBURG Plastic Free Forming (APF), which gives a final definition to plastic injection operations. Always when a new piece of plastic was designed, the only way to test the strength and find possible structural or visual defects was to produce an example of a piece that had to be molded and used a significant amount of raw materials to process a healthy piece. And then face the necessary tests on it. In addition, the process took a long time. For this reason, there was always a need for a device that produces parts without limitations in shape and to some extent in size as a prototype and with the same structural technical specifications. The ARBURG Plastic Freeforming (APF) machine was exactly what the plastics industry needed.
The ability to make parts by receiving the file directly from 3D CAD, the ability to use granules of materials in it, the speed of achieving the original example, uniform structure and a shape and economic efficiency are the most important features of this device.
In this machine, standard granules are converted into molten material in the same way that they are injected in standard machines and become a point and regular face in a row and on the beach, which results in higher mechanical properties and more stable production parts. Also becomes. With this method, it is also possible to make two-color pieces or with a more complex geometric shape.
Plastic injection industry
The future of the plastic injection industry, manufacturer of plastic molds, plastic injection products